http://www.facebook....524430277605823
Busa Mini
Started by
pinkmini99
, Jun 23 2013 09:02 PM
7 replies to this topic
#2
pinkmini99
-
- Members
-
- 563 posts
Super Mini Mad
#3
Sam Walters
-
- Members
-
- 2,765 posts
Up Into Fourth
Posted 23 June 2013 - 09:05 PM
Good effort.
two r1 engines will fit in the front if you fancy driving the rear wheels.
#4
rally515
-
- Members
-
- 3,848 posts
Up Into Fourth
- Location: ask!
Posted 23 June 2013 - 09:05 PM
Looks expensive 
Very clean job there 
Any video's ?
Cliff
#5
R1mini
-
- Members
-
- 1,385 posts
One Carb Or Two?
Posted 24 June 2013 - 06:19 PM
Good effort.
two r1 engines will fit in the front if you fancy driving the rear wheels.
Will they? No chance
#6
Sam Walters
-
- Members
-
- 2,765 posts
Up Into Fourth
Posted 24 June 2013 - 07:07 PM
Good effort.
two r1 engines will fit in the front if you fancy driving the rear wheels.
Will they? No chance
Yes. But the engines need to be rotated through the axis of the drive plane.
They will fit if the models I've got of an r1 engine are anything near accurate.
#7
R1mini
-
- Members
-
- 1,385 posts
One Carb Or Two?
Posted 25 June 2013 - 05:14 PM
Good effort.
two r1 engines will fit in the front if you fancy driving the rear wheels.
Will they? No chance
Yes. But the engines need to be rotated through the axis of the drive plane.
They will fit if the models I've got of an r1 engine are anything near accurate.
Well I have an R1 engine and can tell you they won't fit
Cheers
David
#8
Sam Walters
-
- Members
-
- 2,765 posts
Up Into Fourth
Posted 25 June 2013 - 09:17 PM
Good effort.
two r1 engines will fit in the front if you fancy driving the rear wheels.
Will they? No chance
Yes. But the engines need to be rotated through the axis of the drive plane.
They will fit if the models I've got of an r1 engine are anything near accurate.
Well I have an R1 engine and can tell you they won't fit
Cheers
David
I don't have the model I made to show you. But essentially you need to rotate them into each other at an angle. It also involves a couple of jack-shafts.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
