Learner Driver
Posted 28 July 2013 - 11:38 PM
1986 Mayfair 1000 Auto
I keep seeing references to adjusting the bands in an auto but i can't find the procedure anywhere. I have an older haynes manual, but it doesnt have it either. My trans doesnt slip, but it does occasionally jerk when shifting leading me to think there is too much slack in the bands and the jerk is the slack being taken out during a shift? i know it isn't the easiest thing to do in car, but i'm about to have the front end off and would like to do it then. Thank you!
Camshaft & Stage Two Head
Posted 29 July 2013 - 12:12 AM
First...these are the people left who supply parts for the AP transmission.... http://www.jpat.co.uk/
This write up on the AP transmission is about as good as I can find anywhere..... http://members.tripo...erica/id72.html
Learner Driver
Posted 29 July 2013 - 12:54 AM
First...these are the people left who supply parts for the AP transmission.... http://www.jpat.co.uk/
This write up on the AP transmission is about as good as I can find anywhere..... http://members.tripo...erica/id72.html
I've found the ap trans writeup site before but its blocked on my work computer so i can't scroll through it readily, but i'd never found the jpat site. Thank you!
Camshaft & Stage Two Head
Posted 29 July 2013 - 02:28 AM
No problem - I'm building info up for the inevitable day when I have to pop the front cover and twiddle myself.
If you do it....take a few photos if you have the time 
Learner Driver
Posted 29 July 2013 - 03:46 AM
No problem - I'm building info up for the inevitable day when I have to pop the front cover and twiddle myself.
If you do it....take a few photos if you have the time
will do! i see that japt is selling full overhaul kits... anyone know what that includes?
Camshaft & Stage Two Head
Posted 29 July 2013 - 03:55 AM
No. i'd be guessing if I said I did, drop them an email, see if they reply.
They do seem to have everything though.
On Sabbatical
Posted 29 July 2013 - 08:36 AM
The proper Rover workshop manuals include all the detail needed to test and overhaul the Auto transmission. They are on the BMH technical CDs I believe.
I'd tend to suspect it's more to do with the clutch plates, but I don't know a huge amount about these boxes.
Stage One Kit Fitted
Posted 05 September 2015 - 08:28 PM
In case anyone is watching this, let me revive it. I have my transmission apart and want to make sure the bands are adjusted right before assembling.
Each of the three has a different actuator travel.
Anyone have the adjustment specs.
As for sourcing, Jpat has a lot of parts and a kit, but not some. I got my forward clutch pack from KMP engineering. They make the Pressure plates that Jpat does not carry.
Moved Into The Garage
Posted 05 September 2015 - 09:54 PM
What year model is the gearbox?
One Carb Or Two?
Posted 05 September 2015 - 10:38 PM
0 members, 1 guests, 0 anonymous users
