I eventually managed to get my clutch and brake master cylinders off (even though the brake clevis pin wa rusted in.. >
Now, the little "Tray" that they sit in on the bulkhead has corroded where the top engine steady attaches and the hole that the bolt goes through (for the steady) is the size of a 10p...I am assuming it should be the diameter of the bolt.
Apart from that, when I lifted it off the bulkhead, the years of accumulated brake fluid have left it in a sorry state.
Anyone know if this "Tray" is available as a new part? and if so...where can I get one.
I have scoured all the magazines but can't find any reference to it.
Does that mean I have to do some more welding???!!!! :'(
New or repair?
Started by
Fish Lord
, May 15 2006 01:05 PM
9 replies to this topic
#1
Posted 15 May 2006 - 01:05 PM
#3
Posted 15 May 2006 - 04:34 PM
I have not seen these in the older catalogs I have but I don't doubt they are available. Contact M-Machine, they probably have the part if it's available.
#4
Posted 15 May 2006 - 09:47 PM
Is it this one?
Minispares bracket
I recently refurbed mine because it wasn't too bad and I'm on a budget. Final result was good too - now means I can mount the hydraulics cylinders.
EDIT - Looks like it's currently out of stock tho'
Minispares bracket
I recently refurbed mine because it wasn't too bad and I'm on a budget. Final result was good too - now means I can mount the hydraulics cylinders.
EDIT - Looks like it's currently out of stock tho'
#6
Posted 15 May 2006 - 09:56 PM
a link to the search page 'boo......?
#7
Posted 16 May 2006 - 07:20 AM
lol no its a link to ebay
#8
Posted 16 May 2006 - 07:45 AM
Not on my PC its not - I get the search page too!
#10
Posted 18 May 2006 - 07:47 PM
Thanks Guys...not really needed yet but just liked to know if it was an available part.
BEFORE I binned it!!!!
BEFORE I binned it!!!!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users