3 replies to this topic

[petey81]

Hi
Just replacing my timing chain and sprockets. I have no timing dots on them. Do I just set the woodruf keys to TDC? Ie crank at 12 o'clock and cam at 2 o'clock. Hope this makes sense.

[KernowCooper]

What sprockets have you got? there should be some on standard replacements, if not you'll have to find true TDC with a dial gauge, and then set the cam at manimum lift at whatever the manufacturer of the cam says

 

standard cam timing is as per below

 

 

 

 

[petey81]

Cheers
They are Standard sprockets. Looks like I have it correct by the look of the pic.
I had a look at the haynes which I dug out. They have a pic showing woodruf key and alignment set up.many thanks

[petey81]

all done, cheers for the advice, nice quiet engine now.