Hi, i've just got a set of s rims that i really want for my car, problem is... they just touch my 4pots but only just, now do i get 3mm spacers or go back to my s brakes? If i use the shims will my standard bolts be long enough?? Cheers Andy
Spacers or back to s brakes
Started by
vodkakid
, May 18 2006 07:40 PM
5 replies to this topic
#1
Posted 18 May 2006 - 07:40 PM
#2
Posted 19 May 2006 - 11:00 AM
if your going to use spacers at all then get some longer wheel studs. whats better paying a little extra for studs or possably having the studs snap off at hight speed from the stress.
#3
Posted 19 May 2006 - 12:06 PM
Cheers is that true with spacers as small as 3mm
#4
Posted 19 May 2006 - 12:09 PM
well the original studs were made to the correct length for the wheel and hub, u go making to overall dimensions of it longer then you'll lose some of the thread needed, so longer studs are needed, you'll find when u buy spacers they should come with longer studs, just bang the old ones out and hammer the new ones back in, job done!
#5
Posted 19 May 2006 - 01:09 PM
Ok... just checked some retailers and anything 5mm and under doesnt come with longer studs. Cheers
#6
Posted 19 May 2006 - 02:25 PM
just get the longer stud seperate then. better safe than sorry as the saying go's.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users