Just about finished painting the rear end of my Mini (5 layers of Rustoleum Gloss white as basecoat, and flattened with 2500 grit). I was planning to clearcoat, but wondering if I should just do a final cut then wax/seal. Thoughts???
Assuming I do clearcoat then as it's a Rustoleum job I thought it best to stick with a Rustoleum clearcoat (this one http://www.rustoleum...l-clear-enamel/) - have any of you used it and/or have any comments about it?
Cheers,
Colin.
P.S.
I started this as a Rustoleum roller job, but quickly found it's a PITA to roller in those akward places beside the external semas- especially the very lower/rear of the quarter panels... so ended up using Rustoleum rattle cans instead.
