this is my mini clubman 1275 gt
i bought this of ebay as my first ever project as you can see its seen better days but hopefully i can bring it back to life if anyone has any advice i would love to hear it
Posted 04 November 2013 - 12:09 AM
this is my mini clubman 1275 gt
i bought this of ebay as my first ever project as you can see its seen better days but hopefully i can bring it back to life if anyone has any advice i would love to hear it
Posted 04 November 2013 - 08:27 AM
Did you get this all as a job lot dan-21 ? That’s some very bold looking subframes you have there. Looks like you should have ur self a real weapon by the time you finish tho.
Posted 04 November 2013 - 01:36 PM
yes it all came 2gether scotty the person who had it befor me sprayed the subframes green but i rather like them like that lol
Posted 04 November 2013 - 03:52 PM
Edited by megamini_jb, 04 November 2013 - 03:55 PM.
Posted 04 November 2013 - 08:40 PM
i'm sure you can can bring it back to life, good luck with it
Posted 04 November 2013 - 09:38 PM
thanks megamini ill do that
Posted 04 November 2013 - 11:41 PM
i'm sure you can can bring it back to life, good luck with it
thanks mate
Posted 04 November 2013 - 11:42 PM
Did you get this all as a job lot dan-21 ? That’s some very bold looking subframes you have there. Looks like you should have ur self a real weapon by the time you finish tho.
yes it all came 2gether scotty the person who had it befor me sprayed the subframes green but i rather like them like that and yea it should turn out great
Posted 05 November 2013 - 08:15 AM
sweet, looks like a lot of the dirty work has been done for ya.. winner !
Posted 05 November 2013 - 01:16 PM
sweet, looks like a lot of the dirty work has been done for ya.. winner !
it has really thers a little bit of welding that needs doing but only a small bit the hardest part will be puting it back together everything is mixed up in the boxes and its allways easyer when your the 1 that has took it apart but it should be fine
Posted 05 November 2013 - 01:42 PM
I had the same problem, having never taken it apart, it was pretty much trial and error when putting it back together in what order and finding the right bits. you have a slightly taller order on your hands than i did.
Posted 05 November 2013 - 03:06 PM
I had the same problem, having never taken it apart, it was pretty much trial and error when putting it back together in what order and finding the right bits. you have a slightly taller order on your hands than i did.
it is going to be the hardest bit i think and with abit of guess work and going through every page in the manual i should be ok i hope lol
Posted 13 January 2014 - 10:49 PM
going to start a new thread this 1 isnt very good but ill put a few random pics on this 1 untill i sort it :)
altAg3wt-In9-zWjOscn-HwdKls6-GkRH9R9-3aBQSwvUwv.jpg 70.17K
6 downloads
altAgrSba4edLKcpAjmDuy3cZklk1Od6IpLuUY55JeMGrMP.jpg 77.83K
2 downloads
altAh-11z_ZzW7eVyYO50jJOa3Z6kC4R4IEgfRxOVO28ale.jpg 80.25K
0 downloads
altAjAGwEFJKz6utzS1f84WPFV9JEp5C6q8KAP9wk7teqgi.jpg 85.28K
0 downloads
altAmPd1Vrb_BVW_c3TW-P-gtmQTz__p4ATZQn-rU1_b4mj.jpg 75.14K
1 downloads
altAnBOWIDw3sTpxMs3rtHXodsbsYf8dlyivxn3W23IV-0t.jpg 78.5K
0 downloads
altAnK8S7M6jxjed8HxI5ruO-vQ29NmbiY9NKZ_gwbmpP7-.jpg 76.41K
1 downloads
altAodrTMGFj2yJ4MsGJ8Ut5ZZTe_1ExNHOfRXziWWLyy18.jpg 72.29K
0 downloads
altAp7OLUxv7AxJMLQBwy0cTC-NpnmIP6ukVYEhbXt5Xx6f.jpg 35.73K
0 downloads
altAqSuhKwQBwoxOdzYe5O9jkK4NH5QZoWkwTmF2xzgMbNq.jpg 35.53K
0 downloads
altArONLuy7RH2d4KVH1rI9UmCXLYLCD4XAJnUgm8kgcliu.jpg 85.57K
1 downloads
altAsz3LgkowoCOO18U4bVHsa14OsxnfdcvCBaohobEUGj3.jpg 65.87K
0 downloads
altAszYCumnlTXCJoAMm0XzkX4cFsWntyXkxK3024CWFQBr.jpg 38.51K
0 downloads
altAtZx2HIZ_sp-MWdgYrDGCsJLfGp_5-W8SBUNG7AEeyqI.jpg 73.17K
0 downloads
altAuMPdJzFXw8JYSj2Y8BfbyoGivfMrZCdGOjKdef5ZYds.jpg 76.3K
4 downloads
altAvlh4n3OY-IMa-wfJu45Y7-7mx_h0stVCSWq5UkmGSO_.jpg 80.34K
0 downloads
altAvr4_FkU6wBoQYK8UbWV8djWpjmkWakUP6BPVLGkN5aS.jpg 78.04K
2 downloads
Posted 14 January 2014 - 01:11 AM
tell me what you think and any advice is welcome :)
Posted 14 January 2014 - 12:25 PM
looks like a solid base for a project
0 members, 1 guests, 0 anonymous users