10 replies to this topic

[chris_mg72]

Megajolt MAP version with 10 psi map already in. Comes with loom that I made with loads of wire spare, coil pack and leads , EDIS module You will need a trigger wheel and crank sensor to complete. Also comes with laptop and software. I have had the ecu connected to the computer and all works as it should. Also lond serial lead include sold

 Turbo cylinder head from drayton mannor challenge car. Bronze guides Machined chambers for 8.5: 1 compresion A brill head £250  reduced to 190


Std 12g940 mg metro head great basis for a race head £60 reduced to 50

Std 12g295 11stud head standard un abused £130 reduced to 100
Was going to turbo my metro but k series car has changed my plans I am 2 min from junction 2 on the M180 Ring chris on 07835568072

Edited by chris_mg72, 04 December 2013 - 08:58 PM.

[chris_mg72]

Forgot to add Turbo short motor Std mint turbo block Turbo std pistons with new rings Propper Tuftrided crank std and mint Kc500 cam Lightened duplex engine front plare and timing cover £300

All prices ono

[chris_mg72]

Also got
excellent turbo with
good carb and plenum
Inlet and exhaust manifold
Pipe between turbo and carb
Fuel pump
Fuel regulator
Plenum with dump valve take off
Compkete kit
£300

[Pauly]

Hi,

Where are you located?

[chris_mg72]

Hi I am between Doncaster and scunthorpe . Just off the m180 junction 2 .
Can meet people on m62. A1 or m1 as near to all.

Chris 07835568072

[chris_mg72]

Prices now reduced see above

[steven]

Any pics of the 12g295 ?

[Easyrock]

Could you send me some pics of the 295 please?

[chris_mg72]

Hi the 295 has gone sorry

[chris_mg72]

Mega jolt also gone

[min ritz ryan]

Have you still got the turbo cylinder head, and is it for a 1275 engine?