Jump to content


Photo
- - - - -

Fog Light Switch


  • Please log in to reply
4 replies to this topic

#1 jonnyenglish

jonnyenglish

    Mini Mad

  • Members
  • PipPipPipPip
  • 229 posts
  • Location: Maldon, Essex

Posted 08 February 2014 - 04:59 PM

my fog light tell tale isn't working what could this be? i assume bulb? how do you change the bulb and what bulb is it? need to fix this before the MOT monday.

 

thanks for your help,

 

jon

 



#2 tiger99

tiger99

    Crazy About Mini's

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 8,584 posts
  • Location: Hemel Hempstead

Posted 08 February 2014 - 05:22 PM

I assume it is built into the switch, and is a standard Mini item? In that case a new switch is the easiest fix, as they are usually little wire-ended bulbs, soldered in, however they do vary and the only way to be sure is to take it out and have a look. It is never worthwhile trying to dismantle and repair these switches. Some cars have been fitted with other arrangements, which may of may not involve easily replaceable bulbs.

 

Check that the black earth wire to the switch is intact, as if that falls off, the bulb will not work.

 

Edit: Somerford show bulb GLB921. I don't know how you change it.

 

http://www.somerford...page=page&id=87


Edited by tiger99, 08 February 2014 - 05:24 PM.


#3 richmondclassicsnorthwales

richmondclassicsnorthwales

    One Carb Or Two?

  • Traders
  • PipPipPipPipPipPipPip
  • 942 posts
  • Location: Co Mayo

Posted 08 February 2014 - 07:51 PM

Hi, The switch will come apart but be gentle. With it in the off position, use a small flat screw driver and prize the rocker switch out from it,s housing.

This is on the pivot where the switch rocks on and off (on the side).

The bulb is a small Edison Swan type. The best way to get it out is to use a piece of washer tube, push it over the bulb and unscrew.

I do have these bulbs. They are 12v, 2.5w. They are NOS and not available from most places but I do have some.

Also try some Servisol switch cleaner if the switch is working one minute then not the next.

Failing that I do have some second hand switches that are good.

Give me a call if you need any more help, 07596 541072

Regards, Neil...............


Edited by richmondclassicsnorthwales, 08 February 2014 - 08:02 PM.


#4 A-Cell

A-Cell

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,610 posts
  • Location: Longbridge

Posted 08 February 2014 - 08:04 PM

Minispares also sell the bulbs GLB280
http://www.minispare...|Back to search

#5 Rog46

Rog46

    Speeding Along Now

  • Noobies
  • PipPipPipPipPip
  • 465 posts
  • Location: Sussex
  • Local Club: NSMOC

Posted 09 February 2014 - 10:13 PM

You could wire another bulb into the system as a temporary measure, this could be mounted anywhere on the dash!

Edited by Rog46, 09 February 2014 - 10:14 PM.





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users