Carb Adjustment/mixture Nut
Best Answer jime17 , 09 April 2014 - 06:29 PM
I use a 17mm short spanner from the off side on a hs4.
I can only usually adjust half a flat before turning the spanner over.
Go to the full post
#1
Posted 09 April 2014 - 05:28 PM
When I was trying I turned the wrong way and it went right to the top, I should point out that I managed this by hand, not with a spanner
But now I need to back it off I can't turn it by hand but also can't seem to get a spanner in there to turn it. I have got one of the tiny spanners that minispares sell for carb adjustment but this is too small
Any suggestions?
#2
Posted 09 April 2014 - 06:29 PM Best Answer
I can only usually adjust half a flat before turning the spanner over.
#3
Posted 09 April 2014 - 06:57 PM
#4
Posted 09 April 2014 - 06:59 PM
#5
Posted 13 April 2014 - 08:15 PM
Stubby spanner worked perfectly - Thanks!
#6
Posted 13 April 2014 - 08:19 PM
17mm !!!
Bl**dy heathen...
#7
Posted 13 April 2014 - 08:26 PM
17mm !!!
Bl**dy heathen...
Lol - Only way I could get a stubby spanner without buying online and having to wait
#8
Posted 14 April 2014 - 06:43 AM
17mm !!!
Bl**dy heathen...
Yes you are quite correct and I wouldn't normally but I don't have a short enough 11/16.
i always have a guilty look over my shoulder before using it
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users