guys,
Have a 998 engine with stage one tuning kit, whats the best and easiest way to get a large power increase
James
998 Engine
Started by
brummaster1934
, May 06 2014 05:50 PM
8 replies to this topic
#1
brummaster1934
-
- Noobies
-
- 99 posts
Stage One Kit Fitted
- Location: wiltshire
Posted 06 May 2014 - 05:50 PM
#2
coopdog
-
- TMF+ Member
-
- 4,506 posts
Up Into Fourth
- Location: South Wales
Posted 06 May 2014 - 05:52 PM
you wont get a large power increase with a 998 :L
what do you consider a large power increase?
#3
brummaster1934
-
- Noobies
-
- 99 posts
Stage One Kit Fitted
- Location: wiltshire
Posted 06 May 2014 - 05:56 PM
just a power increase thats worth doing really mate
#4
cal844
-
- Members
-
- 9,490 posts
Crazy About Mini's
- Location: Ballingry, Fife
- Local Club: TFMOC
Posted 06 May 2014 - 06:01 PM
Port, polish (gas flow) and remove the shrouding around the valves, re cut valve seats(fit unleaded/new seats)
#5
brummaster1934
-
- Noobies
-
- 99 posts
Stage One Kit Fitted
- Location: wiltshire
Posted 06 May 2014 - 06:03 PM
should i get a head already done, what about roller rockers
#6
gould1990
-
- Noobies
-
- 128 posts
Mini Mad
- Location: bristol
- Local Club: Bristol Mini Drifter
Posted 06 May 2014 - 06:10 PM
I'm looking into doing my head next. Need to save for it
#7
brummaster1934
-
- Noobies
-
- 99 posts
Stage One Kit Fitted
- Location: wiltshire
Posted 06 May 2014 - 06:17 PM
how much will it cost do you think
#8
gould1990
-
- Noobies
-
- 128 posts
Mini Mad
- Location: bristol
- Local Club: Bristol Mini Drifter
Posted 06 May 2014 - 07:23 PM
all dependent on what you go for in the sense and where you buy it from can range from £200 to +£1000
you could get a stage 3 standard head for about £250
#9
brummaster1934
-
- Noobies
-
- 99 posts
Stage One Kit Fitted
- Location: wiltshire
Posted 06 May 2014 - 07:33 PM
ok thanks will look into this
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
