13 replies to this topic

[Merryck]

Hi guys, I've had some issues with the Midget and I'm going to have to sell my Red Hot and a few bits to cover the cost, so here goes.

 

The Red Hot as it stands now;

 

 

It comes with all the panels required to finish it except for the drivers side bulkhead.

 

I'm looking for around £700 for this and the panels. Sensible offers accepted.

 

Also up for sale, I've got a 1275cc engine, could be a Metro engine, can't remember! I'll head up and get the engine number tomorrow. It's a good engine, last ran about 6 months ago, and ran well. Comes with all ancillaries (carb, dizzy etc.) I had the head gasket go about 4 years ago and had the head skimmed etc. before it went back together. The wheel came off on the way home, so this hasn't even done 30 miles since it was put back together. Wheel came off another car, not the Red Hot!

 

£450 for that (will get photos) SOLD

 

Also have a black vinyl interior, two front seats, rear seats and all cards. Nice interior, only one tear on drivers seat iirc.

 

£100 for this (will get photos tomorrow)

 

Set of four Yokohama A008's 165/70/10, never used, just sat waiting for me to sort the red mini out!

 

£170

 

Also got a Stage 1 manifold and side exit exhaust. Not sure what make, but I don't tend to buy cheap, so isn't going to be crap. Done about 15,000 miles.

 

£70

 

KAD Quickshift (fitted, but barely used).

 

£70

 

1098 short block and internals missing only the cam

 

£40

 

I've also got some 12" minilight style alloys for sale, not sure what make, one will need serious sorting out as it hit a kerb once upon a time.

 

£50 for the set.

 

Also got a roll cage of unknown providence. It's got a rear hoop and bolt on front legs. All bolt in, but no bolts. Definitely only a cosmetic one. Never tried fitting it, bought it and decided against it

 

£70

 

Set of 6x10 Paddy Hopkirk MAG GT's, need refurbing, similar to D1's will get photos tomorrow.

 

£80   SOLD

 

Need this stuff gone ASAP, so am open to offers.

 

Located in Hythe, Kent

 

All to be collected.

 

I think that's everything, but if I find anything else when I go up tomorrow then I'll add it on, so check back tomorrow! Sorry for the lack of photos, but I'll get some more tomorrow. PM me or text me at 07702 119670. Don't call, because I'll cry at you over the phone about how I have to sell my mini!

Edited by Merryck, 26 May 2014 - 01:02 PM.

[Tomm]

Possibly interested I. The MAG GT and Stg1, photo dependent.

Cbeers

[buster_mr_b]

Interested in the seats, please supply puctures

[Snight123]

Possibly interested in the engine, what's the mileage on it? History? Picture?

[lukesanders]

Have you got any red hot parts other than the shell?

[Merryck]

 

Here are the photos people were after. The seats look much worse than they are, they're actually in really good condition with the only tear on the one just above (close up further up).

 

I started cleaning the wheels up to refurb them, but don't have the time any more.

 

I was told the engine had done 50k miles, but I have no paperwork or anything for it. It pulled well when I drove it, and ran sweet as a nut (until the head gasket went). I had that done properly, had the head skimmed etc. On the way home my passenger front wheel came off as some joker had loosened my wheelnuts. It hasn't been used since then, just started every now and then to keep it all good. Last ran about three months ago when I took it out of the car. I'll grab a photo of it tomorrow.

[Lucas1988]

The panels you have do you have any heritage panels amongst them?

[Merryck]

The only heritage panel is a scuttle.

[bikenutmart]

You have a PM. Mart.

[D291UDV]

any pics of roll cage

[Merryck]

Will get cage pics tomorrow. Is all in different places so need to find it all.

[Merryck]

Bump

[mk1mad]

hi how much on scuttle posted ta

[Merryck]

Don't want to be sending panels etc. as I've had pretty bad experiences in the past with things getting damaged, sorry!