Is this easy enough without me destroying everything in sight? Ive read the haynes, but has anyone got any tips?
SPI throttle body cleaning
Started by
Bounce
, Jun 18 2006 08:51 AM
5 replies to this topic
#2
Sprocket
-
- Members
-
- 7,266 posts
Great on Injection faults
- Location: Warrington
- Local Club: Manchester Minis
Posted 18 June 2006 - 10:14 AM
Creaning it with what and on the outside or iniside?
#3
minidaves
-
- Traders
-
- 4,933 posts
Up Into Fourth
- Location: kent
- Local Club: mine
Posted 18 June 2006 - 11:02 AM
air intake cleaner, or carb cleaner
dave
dave
#4
Bounce
-
- Members
-
- 2,197 posts
Up Into Fourth
Posted 18 June 2006 - 11:37 AM
Isopropen alcohol, it cleans away all sorts of crud and evaporates away. Use it at work all the time.
#5
Sprocket
-
- Members
-
- 7,266 posts
Great on Injection faults
- Location: Warrington
- Local Club: Manchester Minis
Posted 18 June 2006 - 05:12 PM
Dont know what that is but if its the same as carb cleaner then it should be fine. Just be aware that there are plastic and neoprene parts in the throttle body and injector/ regulator housing, if that stuff you suggest reacts with any of the above then again i'd advise, as minidaves has, the carb cleaner. I found most of the crud just wipes off anyway with a bit of elbow grease anyway.
#6
Bounce
-
- Members
-
- 2,197 posts
Up Into Fourth
Posted 18 June 2006 - 05:29 PM
sweet, so no nasty little suprises for me?
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
