8 replies to this topic

[pinkeknight]

Hi can any one tell me what size metal to use for repairing the area around rear subframe mounts I'm not sure which mm to use

[big-jay]

I'm pretty sure it's 1.2mm

[Gremlin]

Do you mean in the boot floor or on the subframe itself?

[sonikk4]

Heelboard is 1.2 mm, the boot floor itself is 0.9 mm.

[pinkeknight]

Thanks for that yes I ment heel board and what ever that piece is in rear bins it's against the outer edge it almost looks like a piece of box section but as of yet I can't seem to find out what it is called

[sonikk4]

That bit is attached to the inner sill and is the inner sill stiffener. This also attaches to the inner arch front close out panel.

[pinkeknight]

Can you buy these or will I need to fabricate it

[sonikk4]

All can be bought let me find the link

 

This is the inner sill stiffener but under a different name

 

11.37.02.03 Plate, Companion Box Closing, LH 5.50 6.60

11.37.02.04 Plate, Companion Box Closing, RH 5.50 6.60

http://www.m-machine.co.uk/cat.pdf

 

These are the arch close outs, both sections

11.41.07.03 Closing Panel, Sub Frame, LH 4.15 4.98

11.41.07.04 Closing Panel, Sub Frame, RH 4.15 4.98

11.41.08.03 Closing Panel Segment, LH 3.10 3.72

11.41.08.04 Closing Panel Segment, RH 3.10 3.72

 

You can buy these from Heritage as a one piece item.

[pinkeknight]

Cheers mate but I ordered it all from mini spares before I had chance to read that