3 replies to this topic

[rodandtom]

Hi,

 

Where's the best place to get a good range of these for a DA please? A quick search on Amazon only shows you can go to about 360 grit but I would have thought for initial sanding as a prep for painting that would be too coarse.

 

What have you all used?

 

Thanks,

 

Rod

 

[Daz1968]

I get most my stuff off eBay, not as much choice in 125mm though, I changed to 150mm and choice is far better and prices lower as well. Mirka abrasives are brilliant but not sure if available in 125mm.
I used p320 and p400 for flatting primer and anything from p80 to p240 on filler. Then p1500 followed by p3000 on top coat before compounding.

Edited by Daz1968, 08 July 2014 - 04:47 PM.

[rodandtom]

cheers.  I could always use 150mm and cut it down 

 

Rod

[henri1972]

are they hook and loop if so toolstation do packets of ten from £1.83 i have some they are great