Hi
Can someone kindly show me where the Throttle Return Spring connects to, the other end is on the Anchor tag on the carburettor.
I cannot find its location in any manual.
Ta
Throttle Return Spring
Started by
jambos
, Jul 30 2014 07:34 AM
4 replies to this topic
#2
toplessmin
-
- Noobies
-
- 1 posts
Starting My Mini Up
- Location: mid sussex
- Local Club: mini club sussex
Posted 30 July 2014 - 10:31 AM
the other end hooks on to a bracket on the exhaust manifold clamp. I always find it easier to fit to the exh/man clamp first and use a loop of cord to pull upward to insert into the tag on the carberettor remove the air filter first and beware springs bite. hope i'm not teaching how to suck eggs!
#3
Stiggytoo
-
- Members
-
- 1,170 posts
Best Plucker?
- Location: Woking
- Local Club: CCMOC
Posted 30 July 2014 - 06:24 PM
Generally it attaches to the carb abutment plate. Do you know what carb you have fitted, or better yet a photo of yours or a similar one.
#4
jambos
-
- Noobies
-
- 11 posts
Learner Driver
Posted 31 July 2014 - 04:58 AM
Generally it attaches to the carb abutment plate. Do you know what carb you have fitted, or better yet a photo of yours or a similar one.
This is the abutment plate on my 850.
#5
Rog46
-
- Noobies
-
- 465 posts
Speeding Along Now
- Location: Sussex
- Local Club: NSMOC
Posted 31 July 2014 - 09:22 AM
the other end hooks on to a bracket on the exhaust manifold clamp. I always find it easier to fit to the exh/man clamp first and use a loop of cord to pull upward to insert into the tag on the carberettor remove the air filter first and beware springs bite. hope i'm not teaching how to suck eggs!
Agreed a bracket on exhaust clamp.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
