7 replies to this topic

[warning634]

Hi guys

On my new motor I have this type of bottom pulley:-



But I'm also running megajolt system with a trigger wheel, but it will not fit into this type of pulley, as you can see from this picture:-



So do you think that I can undo the Allen bolts, redrill 4 new holes and bolt it directly onto the pulley, instead of being held on with the large pulley bolt



Please let me know what you think. I guess my other option is to remove the centre section and get a new piece machined so it will fit into this type of pulley

Cheers

Kevin

[Stiggytoo]

That should be fine. Just make sure it is central.

[Carlos W]

Are you running a cam belt in place of the chain?

[warning634]

Are you running a cam belt in place of the chain?

Yes it is fitted with a cam belt kit.

[Carlos W]

 

Are you running a cam belt in place of the chain?

Yes it is fitted with a cam belt kit.

 

 

I wonder whether that is where the difference is?

[warning634]

The cam belt kit is not causing the problems, it's due to that it's not running the standard v belt pulleys, it has toothed belt pulleys and the internal dia of the bottom pulley is too small to fit the trigger wheel.

[cooperdan]

Yeh just re drill...

i did this on my 1380 build.

[Gr4h4m]

As long as the cut out is in the correct place, it cant move and you line the sensor up correctly it will work fine...