I cannot see where this wire should go - I'm sitting here reading a Haynes manual but I cannot find it.
Driving. Me. Mad.
wire 2.jpg 33.49K
37 downloads
Where Does This Wire Go? Here's A Challenge...
Started by
tms1001
, Aug 06 2014 08:28 PM
4 replies to this topic
#1
tms1001
-
- Noobies
-
- 55 posts
Stage One Kit Fitted
- Location: Ipswich
Posted 06 August 2014 - 08:28 PM
#2
cal844
-
- Members
-
- 9,713 posts
Crazy About Mini's
- Location: Ballingry, Fife
- Local Club: TFMOC
Posted 06 August 2014 - 08:55 PM
Coil negative, what type of distributor is fitted?( points or electronic?!)
#3
KernowCooper
-
- Mini Docs
-
- 7,847 posts
Sparkie
- Name: Dave
- Location: The South West
- Local Club: Kernow Mini Club
Posted 06 August 2014 - 08:58 PM
Coil + its a supressor to cut down coil noise on radios and the like, and is fitted on the live terminal of both alternator and coil. new radios dont suffer these days like the old ones
Edited by KernowCooper, 06 August 2014 - 09:02 PM.
#4
tms1001
-
- Noobies
-
- 55 posts
Stage One Kit Fitted
- Location: Ipswich
Posted 06 August 2014 - 09:05 PM
Thanks everso - am assuming it shouldn't be attached then?
#5
KernowCooper
-
- Mini Docs
-
- 7,847 posts
Sparkie
- Name: Dave
- Location: The South West
- Local Club: Kernow Mini Club
Posted 06 August 2014 - 09:09 PM
Should have said the slot in the body goes under a bolt so its earthed, you can take it off and see if you get any noise on your radio, if you have one?
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
