Hey guys, my SPi came with a K&N cone filter fitted. The only thing is I don't think it's fitted properly as the green sensor is just flopping around under the filter. Surely this isn't right? I blocked up the red pipe with a screw (just taped when I got it) and the black sensor is now located properly.
Where should this green sensor go? Any instructions welcome.
K&n Installation Instructions
Started by
Richie83
, Aug 13 2014 07:48 PM
2 replies to this topic
#1
Richie83
-
- Members
-
- 1,494 posts
One Carb Or Two?
- Location: Somerset
Posted 13 August 2014 - 07:48 PM
#2
FlyingScot
-
- TMF Team
-
- 2,661 posts
Up Into Fourth
- Location: Inverclyde Scotland
- Local Club: Mini Cooper Register
Posted 13 August 2014 - 08:24 PM
It fits under the base plate.
See this thread http://www.theminifo...oint-injection/
And these pictures from same
image.jpg 83.17K
8 downloads
image.jpg 78.08K
6 downloads
FS
See this thread http://www.theminifo...oint-injection/
And these pictures from same
image.jpg 83.17K
8 downloads
image.jpg 78.08K
6 downloadsFS
Edited by FlyingScot, 13 August 2014 - 08:25 PM.
#3
Richie83
-
- Members
-
- 1,494 posts
One Carb Or Two?
- Location: Somerset
Posted 13 August 2014 - 08:38 PM
Ah, makes sense. How on earth is my car running with it loose - madness. I'll screw it back in tomorrow. What's the black sensor? Also not sure the filter is fitted properly at all as it's physically squashed by the bonnet - serious previous owner syndrome.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
