Jump to content


Photo
- - - - -

Older Style Cylinder Head Temperature Sender And Spiral Wrap Cabling Sought.


  • Please log in to reply
5 replies to this topic

#1 petehuws

petehuws

    Speeding Along Now

  • TMF+ Member
  • PipPipPipPipPip
  • 329 posts
  • Location: UK

Posted 25 August 2014 - 04:52 PM

Hello folks,  I'm planning on stating a full on engine strip & rebuild of my very dirty laid up Austin Mk2 Cooper S...

One question, is the temperature sender and the spiral wrapped cable/loom still available?  All I see available are the more later spade terminal type.  Below is a picture of what I'm talking about.

Many thanks

heatersendercable_zps8ef15840.jpg

 



#2 Carlos W

Carlos W

    Mine is purple, but I have been told that's normal

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPipPipPip
  • 10,115 posts
  • Location: Sittingbourne, Kent

Posted 25 August 2014 - 04:55 PM

That is a capillary type rather than an electric one



#3 petehuws

petehuws

    Speeding Along Now

  • TMF+ Member
  • PipPipPipPipPip
  • 329 posts
  • Location: UK

Posted 25 August 2014 - 05:01 PM

Yes, sorry I should have maybe been more specific & mentioned that.  All I see on minispares, and the like are the electrical 'wired' style.  Been looking on the various MG, & Austin Healey sites for capillary or the Bourdon tupe principle style - nothing is coming to light.  I may just clean up & repair what I have...

Thanks



#4 gazza82

gazza82

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 3,086 posts
  • Location: Bucks
  • Local Club: TMF+

Posted 25 August 2014 - 05:05 PM

What do you mean by repair? Break that tube and it'a a specialist job. And getting rare/harder to get.

Edited by gazza82, 25 August 2014 - 05:09 PM.


#5 gazza82

gazza82

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 3,086 posts
  • Location: Bucks
  • Local Club: TMF+

Posted 25 August 2014 - 05:08 PM

Get one here ... http://www.thegauges...m=cid=9&aid=63

#6 Dusky

Dusky

    Crazy About Mini's

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 5,322 posts
  • Location: Belgium

Posted 25 August 2014 - 05:46 PM

Search for a capillary tube .Be carefull not to break it( breaks easly after all those years) You can replace them, but it is a HARD job to do. You will need to work in cold conditions, and freeze the tubes before starting.

 

 

 

cheers






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users