10 replies to this topic

[MIGLIACARS]

Im after some long reach/sleeved revolution style wheel nuts, new if possible the thread must be 1/2 unf.

 

ive found some on ebay but there 2000000 miles away in a land called aus.

 

 

does any one no were i can find some!!!!!!!

 

 

like these but not 7/16     i need 1/2

 

 

http://www.ebay.co.u...=item19ce344856

 

 

[nicklouse]

How long do you need! And how many?

I might be able to help.

[ray.webster]

These ?.......http://www.midlandwh...Sleeve-Nut.html

[nicklouse]

Im after some long reach/sleeved revolution style wheel nuts, new if possible the thread must be 1/2 unf.
 
ive found some on ebay but there 2000000 miles away in a land called aus.
 
 
does any one no were i can find some!!!!!!!
 
 
like these but not 7/16     i need 1/2
 
 
http://www.ebay.co.u...=item19ce344856

You could drill and retap them.

[Mini Manannán]

Jonspeed might have them? http://www.jonspeedr...e.php&cID=12587

[Udo]

I've got some 1/2 unf nuts that came with the dunlop D1 I had off a Hillman Imp, not as long as the rev type thou??

[MIGLIACARS]

how long is the sleeve

[MIGLIACARS]

How long do you need! And how many?

I might be able to help.

as many as poss but need to be new

 

around 30-50mm sleeve

[Coxie]

http://www.mistertee.co.uk/6.html

Are the wolfrace ones at the bottom of the page any good

[nicklouse]

How long do you need! And how many?
I might be able to help.

as many as poss but need to be new
 
around 30-50mm sleeve

Ah, nothing new,

Still think your best bet seems to be to drill and tap any you can find the right length. As I have found it interesting to find any of a suitable length an I am only looking for 3/8ths

[Udo]

how long is the sleeve

I'll check and get back to you but off top of my head 25mm ish?