1 reply to this topic

[TheFlyingSprout]

Hi All

 

I have a complete 998cc Cooper engine and gearbox unit that I would like to put into my 1982 mini. I know I will have to change to a MK1/2 Tunnel to accomodate the remote change. Is there anything else that I will need to change? I Suspect I would have to change the driveshafts, Hubs etc?

 

Many Thanks

 

 

[Dr s]

Driveshafts should be the same, you'll need the outer half of the rubber coupling joint to slide on in place of the pot joint.
Hubs are the same.
Might need a different slave cyclinder on the clutch but master is ok I think.