2 replies to this topic

[leeuk]

The time has come to re fit the loom into my 68 van but unfortunately the pictures that I took to use as a reference have since been deleted so I`m left with a bunch of wires and no clue as to what terminal i need to attach each one to on the dynamo control box.

Does anyone know to a dummy`s guide diagram showing what colour wires go to what terminal on the control box please, Thanks  

 

[carbon]

Dynamo control box has 5 terminals, going from left to right (with terminals facing down) :

- A1 = main feed out = brown with blue trace, two wires one to ignition switch other to light switch

- A = main feed in = brown from starter solenoid main terminal connected to battery cable

- F = Field = brown with green trace to dynamo

- D = Dynamo = brown with yellow trace, two wires, thick wire to dynamo, thin wire to ignition warning light

- E = Earth = black

[leeuk]

Dynamo control box has 5 terminals, going from left to right (with terminals facing down) :

- A1 = main feed out = brown with blue trace, two wires one to ignition switch other to light switch

- A = main feed in = brown from starter solenoid main terminal connected to battery cable

- F = Field = brown with green trace to dynamo

- D = Dynamo = brown with yellow trace, two wires, thick wire to dynamo, thin wire to ignition warning light

- E = Earth = black

Thankyou very much indeed for posting that, Very helpful indeed