3 replies to this topic

[willjones444]

Hello there,
I have recently put in a new ash dashboard, i have a mini mayfair 1990, red and the 'Revs' clock doesnt work all cables are fine, but i think i might have got mixed up with the wires as there is 3 green wires, 1 for the revs clock and the other 2 for the voltage stabilizer. Does anyone know why my revs counter needle doesnt move when i start the engine. It worked before, but anyone here know why its not working? All cables are fine.
Does anyone have a photo i can go by, or ?

Also my indecators dont work on steering wheel, but work on the switch. However the fuel guage and speedo cable and clock work ok and lights.

Anyone help ??

Many thanks
Will

Attached Files

•  image.jpg   52.08K   5 downloads
•  image.jpg   76.35K   5 downloads
•  image.jpg   38.26K   9 downloads

Edited by willjones444, 10 January 2015 - 09:16 PM.

[petey81]

Push the wires in further or check with a meter. Oh check connections on the coil. Could be a poor earth?

[Spider]

Could also be a crack in the Printed Circuit 'board' on the back, they can be hard to see.

[petey81]

Get some more pictures up.