Evening all.
Just a quick question. Currently my heater hoses come out the bottom right of my heater, by the foot pedals. I keep catching them when using the clutch. If i turned the heater around 180 degrees, so the pipes come out of the top left hand side, would there be any problem with this? I would drill new holes in the other side and weld up the first holes and think it would just be neater, more direct route.
Cheers
Steve
Heater Matrix Pipe Change -Will This Be Ok?
Started by
fikasteve
, Jan 20 2015 09:28 PM
4 replies to this topic
#2
Richie83
-
- Members
-
- 1,495 posts
One Carb Or Two?
- Location: Somerset
Posted 20 January 2015 - 09:30 PM
On my SPi the heater hoses are on the left at the top.
#3
fikasteve
-
- Noobies
-
- 126 posts
Mini Mad
Posted 20 January 2015 - 09:45 PM
Sounds like it shouldn't be a problem then :)
#4
cal844
-
- Members
-
- 9,713 posts
Crazy About Mini's
- Location: Ballingry, Fife
- Local Club: TFMOC
Posted 20 January 2015 - 10:12 PM
My 1989 998 has the hoses on the right(by the pedals) i managed to move the heater to the letf slightly, helped alot
#5
mab01uk
-
- Members
-
- 12,925 posts
Moved Into The Garage
- Local Club: Mini Cooper Register
Posted 20 January 2015 - 11:18 PM
I have reversed the pipes and matrix around by 180 degrees before with no problems........they do vary over the years anyway and between right hand drive and LH drive cars.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
