Could some very helpful chap or chappesses give me a size for the height of the side stripes for a 1275gt (the total height of the three stripes) along with the length of the 1275gt bit (from the leading edge of the "1" to the back edge of the "t", and any other helpful dimensions. Thank you!
Sizes For 1275Gt Side Stripes
Started by
skoughi
, Feb 12 2015 02:48 PM
5 replies to this topic
#1
skoughi
-
- Members
-
- 1,199 posts
One Carb Or Two?
- Location: Lerwick
- Local Club: Shetland classic car club
Posted 12 February 2015 - 02:48 PM
#2
b_sdaddy
-
- Members
-
- 643 posts
Super Mini Mad
- Location: Diksmuide, Belgium
Posted 12 February 2015 - 04:43 PM
Could some very helpful chap or chappesses give me a size for the height of the side stripes for a 1275gt (the total height of the three stripes) along with the length of the 1275gt bit (from the leading edge of the "1" to the back edge of the "t", and any other helpful dimensions. Thank you!
If you'd like, I'm a graphic designer & can prepare .eps file for the vinyl cutter - and don't worry, it's FREE!
#3
skoughi
-
- Members
-
- 1,199 posts
One Carb Or Two?
- Location: Lerwick
- Local Club: Shetland classic car club
Posted 12 February 2015 - 06:08 PM
Thanks b-sdaddy, however I have a couple of good friends who have a graphic design and vinyl sign business who are keen to make the stripes and suitable boot badge for me, however we need some basic measurements to get the stripes done. There are several companies that I could place an order and get what I need but I like to support local business and especially friends. Thinking to try and work something out from a picture but this probably won't be very successful!
#4
skoughi
-
- Members
-
- 1,199 posts
One Carb Or Two?
- Location: Lerwick
- Local Club: Shetland classic car club
Posted 12 February 2015 - 07:35 PM
Found the answer through an Internet search, the two outside stripes are 13mm high with 11mm gaps to a 24mm high center stripe. The letters/numbers are obviously 24mm high so we'll stretch them until they look right!
Edited by skoughi, 12 February 2015 - 07:36 PM.
#5
b_sdaddy
-
- Members
-
- 643 posts
Super Mini Mad
- Location: Diksmuide, Belgium
Posted 13 February 2015 - 09:12 AM
If I had friends with vinyl graphics capability They'd go bust within a month will all the 'freebies' I'd be asking for!
mini's more than most, lend themselves to being 'sitcker'd'.
#6
skoughi
-
- Members
-
- 1,199 posts
One Carb Or Two?
- Location: Lerwick
- Local Club: Shetland classic car club
Posted 13 February 2015 - 10:52 PM
The fellow who I was chatting with was very interested when I told him what it was for, to say his eyes lit up was an understatement! All I'm wanting is an early 1275gt badge and side strips in 1330gt format so shouldn't be any kind of an issue for them, plus its good to use local and speak to folk face to face I always think!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
