Hi Everyone
I'm really glad i've found this site-been driving minis for a few years now as they are one of the few cars that it's possible to repair with a very low knowledge base and a Haynes manual-
Just got a Mini City that is leaning over to one side at the back and , now, finding the FAQ on fitting hi-lo's has saved me an aweful lot of time and stress-excellent
cheers
blub
worlds worst mechanic
Started by
blub
, Jul 18 2006 01:22 PM
9 replies to this topic
#1
Posted 18 July 2006 - 01:22 PM
#2
Posted 18 July 2006 - 01:34 PM
Hello and welcome to TheMiniForum
I have learnt and am still about minis from this site
Enjoy the club B)
I have learnt and am still about minis from this site
Enjoy the club B)
#3
Posted 18 July 2006 - 01:44 PM
Welcome to Tmf!
You have some stiff competition for that title though mate
You have some stiff competition for that title though mate
#4
Posted 18 July 2006 - 03:24 PM
Excuse me, excuse me, welcome yes, but who says world's worst? Worse than me? I don't think so.worlds worst mechanic
Maybe we should have a competition. Let's have examples of silly mistakes in Silly Chat starting
NOW
#5
Posted 19 July 2006 - 09:45 AM
thanks for the welcome,
you're right-i'm probably not THE world worst mechanic but i'm down there somewhere
clutch went on the mini last night-as we set out for a couple of days camping
i've done a clutch before-got it out-fitted a new one-realised i'd put one piece in the wrong way-had to take it all apart again and fix it-put it together then a week later found out that the engine mountings were knackered-happy days
blub
you're right-i'm probably not THE world worst mechanic but i'm down there somewhere
clutch went on the mini last night-as we set out for a couple of days camping
i've done a clutch before-got it out-fitted a new one-realised i'd put one piece in the wrong way-had to take it all apart again and fix it-put it together then a week later found out that the engine mountings were knackered-happy days
blub
#6
Posted 19 July 2006 - 09:59 AM
Hello and Welcome! CAnt be as bad as me. I was sanding down a wheel and something shot into my eye and I had to go to A+E! Now beat that.
#7
Posted 22 July 2006 - 11:24 AM
Hello and welcome to TheMiniForum
#8
Posted 22 July 2006 - 02:21 PM
welcome dude
#9
Posted 22 July 2006 - 06:26 PM
Hello and Welcome! CAnt be as bad as me. I was sanding down a wheel and something shot into my eye and I had to go to A+E! Now beat that.
Was removing the bonnet so I didn’t end up banging me head on it while working, when the spiky bit attacked me and ended up having to have stitches to hold my head back together.
#10
Posted 23 July 2006 - 02:20 AM
Welcome... the forum's are the best, great people on here!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users