2 replies to this topic

[Derry100]

Hi all I am installing the engine harness and have come a bit stuck unfortunately the plugs were never labelled.

1. I have an extra plug next to the purge valve it is the same type of plug, I have done some investigation and think it maybe a cam sensor but I can't find one on my block.

2. I have a round plug at the front of the loom where all the starter motor wires exit the loom, I have investigated from an why wiring diagram and seems to be a inhibitors sensor plug but I think I read this is for automatic only which mine isn't.

3. I just can't the smaller cable with add connection for the starter motor usually white and yellow but just doesn't exist on my loom

i can't seem to be able to add pictures.

[Fast Ivan]

Hi Derry
Welcome to the forum.

You can use photobucket or similar for photos

With regards to the cam sensor connector, there is no cam sensor on the SPI, so it must be for something else

[Derry100]

 image.jpg   66.51K   18 downloads  image.jpg   78.75K   14 downloads  image.jpg   64.07K   17 downloads  image.jpg   63.24K   15 downloads

Images attached