Jump to content


Photo
- - - - -

Mallery's Having A Go!


  • Please log in to reply
41 replies to this topic

#31 Painter man

Painter man

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 84 posts
  • Location: Birmingham

Posted 17 April 2017 - 08:19 PM

Looking sweet mate where did you get your rear window from i would like a removerble one

#32 Mallery10

Mallery10

    On The Road

  • Noobies
  • PipPip
  • 38 posts
  • Location: Preston

Posted 18 April 2017 - 08:01 AM

Plastics4performance based in Lancashire. More pictures earlier in thread. £130.

#33 Mallery10

Mallery10

    On The Road

  • Noobies
  • PipPip
  • 38 posts
  • Location: Preston

Posted 05 May 2017 - 09:13 AM

Quick update  -  Car Mot'd, taxed and insured.  WHooppeeee!!

Took it to TDI North Warrington on Tuesday.  Dyno'd at 230.  Drive home was my first experience of VTEC.  I now get what the Honda boys are always banging on about.  Thanks for all your help over the last 2 years.  Could not have done it without you.  

Next on the list -  More cooling, less noise, suspension set up.  Again thank for all your advice, Phil



#34 cptkirk

cptkirk

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,799 posts
  • Location: West Sussex
  • Local Club: B.M.C. + Chiminiclub

Posted 05 May 2017 - 03:27 PM

Quick update  -  Car Mot'd, taxed and insured.  WHooppeeee!!

Took it to TDI North Warrington on Tuesday.  Dyno'd at 230.  Drive home was my first experience of VTEC.  I now get what the Honda boys are always banging on about.  Thanks for all your help over the last 2 years.  Could not have done it without you.  

Next on the list -  More cooling, less noise, suspension set up.  Again thank for all your advice, Phil

 

Good Skills Sir...........Enjoy



#35 KTM kid

KTM kid

    Mini Mad

  • Members
  • PipPipPipPip
  • 227 posts
  • Location: NORTH WEST
  • Local Club: Crews missels

Posted 06 May 2017 - 11:06 AM

Well done Mallery. You must be on my door step, if you went to TDI in WARRINGTON.
If you need your suspension setting up. I can recommend Ninemater Porsche. On the same estate. They race and set up all kinds of cars. Can recommend the corner weights. That's were I taken mine. Ask for Mark. Nice lads.

#36 KTM kid

KTM kid

    Mini Mad

  • Members
  • PipPipPipPip
  • 227 posts
  • Location: NORTH WEST
  • Local Club: Crews missels

Posted 06 May 2017 - 11:09 AM

Ninemeister Porsche. Warrington. Sorry for spelling it wrong.

#37 Mallery10

Mallery10

    On The Road

  • Noobies
  • PipPip
  • 38 posts
  • Location: Preston

Posted 07 May 2017 - 05:53 PM

cheers 



#38 Mallery10

Mallery10

    On The Road

  • Noobies
  • PipPip
  • 38 posts
  • Location: Preston

Posted 10 September 2021 - 09:51 AM

Hi All

Hope you all well and still enjoying your projects.  Looking for some help to replace a broken offside driveshaft K20 EP3 to unknown hub?(kit about 5 years old).  I know a few have had the same issue?  I can't get hold of Z cars by phone, e mail or social? to see if they had one.

Has anyone had one made of better quality that have had the same issue.  Any help appreciated, Phil



#39 Painter man

Painter man

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 84 posts
  • Location: Birmingham

Posted 03 October 2021 - 06:07 PM

Hi there not sure whatโ€™s going on at Zcars but I have spoken to a few zcar owners who are having the same problem you would be best sending Andy Kirk a pm on here he has had some made for his monster I bet he can help you out

#40 Mallery10

Mallery10

    On The Road

  • Noobies
  • PipPip
  • 38 posts
  • Location: Preston

Posted 03 October 2021 - 10:08 PM

Cheers Painter Man. .  Got hold of a company called Beresfords in Nantwich who are making me one. 



#41 Painter man

Painter man

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 84 posts
  • Location: Birmingham

Posted 05 October 2021 - 07:22 PM

Good news it will be back putting a smile on your face before you know it ๐Ÿ‘๐Ÿ‘

#42 jbuenavides

jbuenavides

    Learner Driver

  • Noobies
  • PipPip
  • 16 posts
  • Location: Florida

Posted 12 October 2021 - 03:22 AM

I am excited to see the update of this build. 






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users