10 replies to this topic

[westlin]

Can some please advice if a clutch casing with DAM 5785-1987 on it would fit a 1275.

thanks

Stephen

[nicklouse]

What do you mean by clutch caseing?

The cover (wok)? The transfer case? Of actually part off the clutch?

All covers fit. Transfer case depends on the gearbox and idler gear.

1275 means nothing and has no bearing on the matter.

[westlin]

Transfer casing, not the cover. Its a 1275 cooper engine and gearbox

[nicklouse]

It depends if both are A + then fine if they are both A serise then fine. If one is A and the other A+ it ain't happening.

[westlin]

Assume your meaning block and gearbox?

[Stiggytoo]

1275 transfer casings have the hole for the breather canister. You will need either A or A+ depending on your gearbox/drop gears. 

[nicklouse]

Assume your meaning block and gearbox?

The block has nothing to do with it.

[Spider]

It will need to mate up with the appropriate gearbox type - and even then, it's not the end of the world.

 

It will mate up with DAM 4818, DAM 2886 and DAM 5626 Gearbox cases. It can be used with others 4 Synchro Cases, but you'll need one of these;-

 

http://minispares.co...|Back to search

[westlin]

Where on the gearbox is the code for the casing

[Spider]

If you look on the case, behind where the oil filter would sit, if it was all bolted up to the engine, there are raised cast nos.

 

Edited by Moke Spider, 28 July 2015 - 09:10 PM.

[Dusky]

If your transfer case doesnt have the breather hole, just drill it :)