5 replies to this topic

[uthgerdthemighty]

Right, i have a promotive kit, but not sure it matters.. anyway, i have hi lows on the front and they are set on lowest point, but the height is still well, high..

Now there's new rubber donuts on the front but surely it still shouldn't be hight on the front?

Holding the project up so i'm at a loss here..

[thedjse]

Any pics of how it sits and how much space do you have under the arch

[whistler]

I've just fitted new rubber cones to the front of mine and they do sit quite high, but apparently settle down after a week or two.

[Mini 360]

Cones will settle.  Make sure the mounts ar on the correct way though on the inner wing....I put mine on the wrong sides and it was like a 4x4!

[uthgerdthemighty]

I don't have pics at the moment. And insee. Only problem is that i have 13x7 wheels with spacers, and i need to drop it enough so i know where to cut the arch and where to have the miglia arches..

Might have to borrow some old rubber cones that have sagged haha.

The mounts are on the right way.. i think... xD

[dyshipfakta]

Cones take a while to squish down they do look like gassers for a while. Wind the hi lows right up so it looks like a landy its actually quite amusing