4 replies to this topic

[sparkymae]

Would like to move my washer bottle to the boot. What type of bracket is used on the later Minis and how is it attached to the right wheel well inside the boot. And does any one sell them.  Thanks

[Rubbershorts]

How it is in my 93 Rio. Welded onto to the offside rear wheel arch. Hope that helps. Daz.

Attached Files

•  instasize_250619081600.jpg   21.89K   3 downloads

[mab01uk]

 

Bracket Item 9 - 
https://www.minispar...p0209/page/173/

 

Fitted to inner wing 1990 on, plus on a bracket (welded) on the rear wheel arch in boot area for all single points onwards:-

https://www.minispar...-bottle-bracket

 

Quote below was for rear washer tube installation, posted by someone who worked on the Mini production line:-
"It goes up the rear C post along the roof and down the front A post and out through the bulkhead through a grommet
Easy job if the headlining is removed, on the Mini line we used to put a small bolt in the end of the washer tube this gave it a bit of weight and helped it along through the body."
https://www.theminif...oute/?p=3510097

Edited by mab01uk, Yesterday, 10:48 AM.

[sparkymae]

Big help, thanks guys :)

[Ethel]

????

Doesn't need to vent so could go flat on the floor, under a boot board. Longer hose, and/or QR connector would allow filling outside car. Note the non return valve in Mab's piccy!