Jump to content


Photo
- - - - -

Rusty 'sheldon' Project, Or Rsp For Short


  • Please log in to reply
17 replies to this topic

#1 alex-95

alex-95

    I am THE CLAMP MAKER

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPipPip
  • 6,042 posts
  • Location: l

Posted 23 October 2015 - 08:37 PM

So today I picked up another project >_<, I wasn't planning on getting another (or 2 :whistling:) mini anytime soon but when one comes up near by and a bit different, I thought I'd better get it. I heard about it through a guy at work so went and had a look over it a couple of weeks back and left an offer which he said he would think about it.

 

It has been sat out side since 2007 due to it failing the MOT on a rusty rear subframe, ball joints, bearings...... It was first bought in the Birmingham area I think where it must have been stored and not driven, so when it came down to cornwall in 2000 for it's first MOT it only had 139 miles on it. The previous owner then drove it up until 2007 with 32000 miles on the clock and has not moved until today.

 

So Last Friday (day before my 20th birthday) I managed to get hold of him again and we struck a deal and arranged to pick it up today but had to go and take the callipers off the front as they were stuck on. The backs were ok as they left the handbrake off but the bracket in the middle of the subframe had rusted off. So we bodged it with some wire, and later used a ratchet strap to tighten it up so we had some brakes.

 

P1010215_zpsedfxa8yr.jpg

P1010214_zpshlz7fakb.jpg

P1010217_zpsu6wmjb5n.jpg

P1010240_zpsjrsbwb3g.jpg

P1010241_zpsqujrr3vl.jpg

 

Bodged handbrake

DSCF0009_1_zpsk9rbkarb.jpg

 

So today we went to collect it, Blew up the tires again to get it rolling and rolled it onto the trailer. 

P1010257_zpsl8cb1abo.jpg

P1010258_zpsashjorev.jpg

P1010260_zpszigy4itt.jpg

P1010261_zpsrtvqldvu.jpg

 

 

And finally in somewhere dry, So the rest of the day was spent checking it over and ripping out the carpets as they were a bit wet. We also tried turning the engine over but wouldn't budge :crazy:. We also drained out all the old fuel probably about 7 litres :X

 

DSCF0015_zpsbjefk99m.jpg

 

DSCF0016_zpsuempfn6u.jpg

 

 

Vacuumed the carpets which they come up quite well for a once over.

DSCF0017_zpstibd3ktt.jpg

 

DSCF0018_zpstwo7528x.jpg

 

DSCF0021_zpsl8sfwhty.jpg

 

 

 

 

 

DSCF0023_zpscip7nbyn.jpg

 

DSCF0026_zpsfmq9zayk.jpg

 

DSCF0024_zpsvvddpam6.jpg

 

DSCF0028_zpsqebccndf.jpg

 

DSCF0027_zpse84ydu6n.jpg

 

Rust under the rear window.

DSCF0029_zps8cff9tph.jpg

 

The a-post a tad rusty.

DSCF0030_zpslvgglgyg.jpg

 

DSCF0031_zpsfq4qazpy.jpg

 

DSCF0035_zpscd4frpur.jpg

DSCF0036_zpst8pocm5i.jpg

 

 

And tucked away with the ritz.

DSCF0034_zpsrtccnxdp.jpg

 

 

Not much will happen with it for a while as I need to get  my other project on the road, but my plans are to keep it all original as all the bits are there and still original, I'm planning on getting some 12" steels for it as the RSP wheels don't hold air for very long.


Edited by alex-95, 12 January 2016 - 09:24 PM.


#2 MrBounce

MrBounce

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 2,661 posts
  • Location: The Manroom in Ipswich

Posted 23 October 2015 - 08:53 PM

Like it! Love an RSP :gimme:



#3 Ben_O

Ben_O

    Mill Road Garage

  • Paint Doctor
  • PipPipPipPipPipPipPipPipPipPip
  • 9,794 posts
  • Location: Isle of Wight

Posted 23 October 2015 - 09:21 PM

The rust looks very minimal.

 

Nice one!



#4 James_eaton_thewholething

James_eaton_thewholething

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,063 posts
  • Location: Manchester

Posted 23 October 2015 - 09:25 PM

Looks like it's going to be an easy fixer upper

#5 Wise Old Elf

Wise Old Elf

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,655 posts
  • Location: Maldon
  • Local Club: Club Lotus

Posted 23 October 2015 - 10:45 PM

Nice  ;D



#6 minimissions

minimissions

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 3,427 posts
  • Location: North West
  • Local Club: M.M.O.C

Posted 24 October 2015 - 10:53 AM

Good to see another RSP getting some love, would mind one of these myself one day, nice project.



#7 Keith Staley

Keith Staley

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 83 posts
  • Location: Bedford

Posted 24 October 2015 - 02:38 PM

That's nice....I likey



#8 alex-95

alex-95

    I am THE CLAMP MAKER

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPipPip
  • 6,042 posts
  • Location: l

Posted 24 October 2015 - 08:24 PM

That's nice....I likey

 

 

Like it! Love an RSP :gimme:

 

 

The rust looks very minimal.

 

Nice one!

 

 

Looks like it's going to be an easy fixer upper

 

 

Good to see another RSP getting some love, would mind one of these myself one day, nice project.

 

Cheers guys, It's not really really bad but has all the usual areas to replace, Inner and outer sill's, floors, wings, front panel, scuttle, a-panels may replace the lower half of the rear panel, Battery box, door surround for the passenger side and door step for drivers, door skins... Other than that it looks good :lol: Just the rear subframe is shot which probably means the heelboard is too.

I've not really had much interest in them, I got a poster of a red one going down steps on the garage door which I've had for a while so it was made to be  :lol:

 

 

 

Nice  ;D

;D



#9 Wise Old Elf

Wise Old Elf

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,655 posts
  • Location: Maldon
  • Local Club: Club Lotus

Posted 24 October 2015 - 08:41 PM

 

I've not really had much interest in them, I got a poster of a red one going down steps on the garage door which I've had for a while so it was made to be  :lol:

 

 

 

OnlyOneCar6.JPG

 

A few more for you :) http://www.rsp-coope...Press_Stuff.htm



#10 James_eaton_thewholething

James_eaton_thewholething

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,063 posts
  • Location: Manchester

Posted 24 October 2015 - 10:58 PM

The list of issues doesn't seem that long at the moment which is good. At least it will be another mini saved which is all good

#11 GT Jimmy

GT Jimmy

    Camshaft & Stage Two Head

  • TMF+ Member
  • PipPipPipPipPipPipPipPip
  • 1,646 posts
  • Location: manchester
  • Local Club: S.U.N.M.C

Posted 28 October 2015 - 08:29 PM

Nice and crusty, she'll be a beauty soon



#12 Gillybobs

Gillybobs

    Mini Mad

  • Members
  • PipPipPipPip
  • 243 posts
  • Location: Sheffield
  • Local Club: Sheffield Mini Club

Posted 28 October 2015 - 08:45 PM

Like the look of that! Looks very unmolested. 



#13 jpw1275

jpw1275

    Up Into Fourth

  • Noobies
  • PipPipPipPipPipPipPipPipPip
  • 2,803 posts
  • Location: Warrington
  • Local Club: I'm a carb addict!!!!!!!

Posted 29 October 2015 - 03:44 PM

What a great project ... Will be watching this mate ...all the best with it

James

#14 Wise Old Elf

Wise Old Elf

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,655 posts
  • Location: Maldon
  • Local Club: Club Lotus

Posted 29 October 2015 - 06:36 PM

Non-original HT leads........... Send it back :)

#15 alex-95

alex-95

    I am THE CLAMP MAKER

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPipPip
  • 6,042 posts
  • Location: l

Posted 30 October 2015 - 10:07 PM

 

 

I've not really had much interest in them, I got a poster of a red one going down steps on the garage door which I've had for a while so it was made to be  :lol:

 

 

 

 

 

A few more for you :) http://www.rsp-coope...Press_Stuff.htm

 

Thats the one :thumbsup:

 

The list of issues doesn't seem that long at the moment which is good. At least it will be another mini saved which is all good

Yeah it's not that bad really

 

Nice and crusty, she'll be a beauty soon

 

 

Like the look of that! Looks very unmolested. 

Cheers, Yeah I don't think it's had any repairs done on it so no hidden surprises.

 

What a great project ... Will be watching this mate ...all the best with it

James

Cheers James

 

Non-original HT leads........... Send it back :)

REALLY!, I wouldn't have bought it if I knew that ;D

 

 

I picked up a new set of wheels for it today, pressure washed them and fitted them. They seem to hold air quite well, better than the alloys and won't have to worry about damaging them.

DSCF0048_zpszlrr3yca.jpg

DSCF0047_zpsvzjaqfwp.jpg

DSCF0046_zpsmytsdwyd.jpg

 

 

Then we thought we'd try turning it over again by sticking it in gear and pushing it but wouldn't go, When we looked through the plug holes we could see a clean valve sticking down so didn't think it was seized. We thought it could be the water pump stopping t so tried turning the fan belt which wouldn't budge. Cut it and found that it was seized to the three pulleys.

DSCF0038_zpshks3hr2a.jpg

Alternator pulley properly stuck

DSCF0037_zpshurng18s.jpg

DSCF0041_zps3gntwyj9.jpg

 

So stuck it back into second and it rolled :gimme: and pumped out the oil we put in the cylinders :thumbsup:. I think it will start up fairly easily with a quick clean/check of the carb, fresh fuel, oil and water, but that will have to wait till the other ones on the road.






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users