6 replies to this topic

[blacktulip]

need some advice about what is the best value road clutch per pound spent for a tuned 1275? what do u lot have?

Edited by mikecmini, 11 August 2006 - 07:02 PM.

[danwebster]

I use a paddle plate which is not what you're after, however I have found Alcon plates to be much better quality than AP if thats any help.

[Sprocket]

If you can find it, a Luk or Valeo turbo clutch is the one to have. There are two others, but thats for when you start getting into the relms of silly bananas, and been tested by a well known engine builder up to 140bhp

https://sslrelay.com...p?recordID=4356

[Guess-Works.com]

First decide what sort of clutch you want, namely verto or diaphram, look at the FAQ on clutchs/flywheels which will give you an idea of the characteristics of each...

[blacktulip]

after reading your wonderful faq it has to be a pre-verto

[Sprocket]

LOL

I thought this was for the MG 1275, and after you saying it was Verto. Ah well there you go

[blacktulip]

lol i meant ill be buying a pre verto to replace the verto