7 replies to this topic

[Dusky]

Hi!

 

Buying some oilfilters tomorrow to change mine an dthe one on my dads, but in the past some belgian shops have sold me the wrong, MPI type , oil filter.

can anyone tell me the size of the oil filter 'screw hole' on a normal carb engine?

I know the mpi ones are slightly bigger but keep forgetting what size it is..

 

eternaly gratefull!

[DFulton]

Don't have the dimensions, but I did take a note of the part number last time I got one from my local motor factor as I've had problems before and had to go back to the shop after dropping the oil.

A COMLINE EOF003 fits my year 2000 MPi cooper and most places will be able to translate numbers between manufacturers.

I used to have the Halfords part number too, but can't seem to locate it now. If I find it, I'll post that too.

[Spider]

The 'Screw Hole' on the 74 - 90 something Oil Filters is 3/4" UNF if that's what you wanted to know.

[ace01]

The Fram number, which is a little easier to cross reference, is PH966b for the standard spin on type and PH4952 for the MPi.  To answer your original question.  The Mpi is 19.2mm and the standard filter is 17.5mm.

Edited by ace01, 19 December 2015 - 10:35 AM.

[Alpenflitzer]

FRAM PH966 B    /Knecht OC 21    MANN W712     Purflux LS 198 B    Mahle W712    Bosch   GS 0 451 102 056 nH

Minispares: GFE 1143

 

Thats all I presently know

Edited by Alpenflitzer, 19 December 2015 - 10:38 AM.

[Spider]

Here's the specs on them which may help cross reference

 

http://www.rycofilte...CARS/model/MOKE

[gav]

FRAM PH966 B    /Knecht OC 21    MANN W712     Purflux LS 198 B    Mahle W712    Bosch   GS 0 451 102 056 nH

Minispares: GFE 1143

 

Thats all I presently know

 

Oil filter not air filter...

[DFulton]

MANN W713/28 fits mine.