I put the mini in for its test on friday,,it failed,,longer studs on the front wheels required,,one of the tie rod nuts came loose at the subframe both these easy fixed, the other fail was headlights he sais he could not see a definable pattern, the guy who tried to set the lights said this as well even after changing the bulbs, these are new angel eye headlights I suggested changing them back to the old sealed units for the test ,,he said they were worst, anyone else have this problem got a solution, cheers.
Lights MOT
Started by
smacmax
, Aug 19 2006 06:26 PM
6 replies to this topic
#1
Posted 19 August 2006 - 06:26 PM
#2
Posted 19 August 2006 - 06:37 PM
Are they "E" marked Angel eyes? I've seen some non E marked ones, and they will fail a MOT.
#3
Posted 19 August 2006 - 06:41 PM
Not sure I understand your specific problem (not sure I understand anything these days) but Huey would have failed on this point (no definable pattern) because the reflective silverwork was breaking up here
so we changed them for crystals.
so we changed them for crystals.
#4
Posted 19 August 2006 - 07:38 PM
Cheep and pants lenses.
A 'complex' (clear, no ribs)lense is not cheep. Fit standard lenses and change em out after.
Angel eye lenses are not e aproved, but then that depends on the age of the car too.
poor beam patterns says it all about these lights, all show and no go
A 'complex' (clear, no ribs)lense is not cheep. Fit standard lenses and change em out after.
Angel eye lenses are not e aproved, but then that depends on the age of the car too.
poor beam patterns says it all about these lights, all show and no go
#5
Posted 21 August 2006 - 04:59 PM
I had the exact same problem in my halogens, and the siver stuff(see pic up there ^) thats arrowed was brown. just explained to the examiner how i have a shed load of bits and will get it sorted right away and he gave me a ticket, but ssshhhh
and i did change the lights officer, thats why the light was out in doms pic of my car at drag wars
and i did change the lights officer, thats why the light was out in doms pic of my car at drag wars
Edited by TNT, 21 August 2006 - 04:59 PM.
#6
Posted 28 August 2006 - 11:31 PM
i have angel eyes on mine and they passed, other parts of the mini dint but thats neither here nor there lol. I was told as long as the pattern is the same it dint matter if they were angel eyes or not.
#7
Posted 29 August 2006 - 06:50 AM
depends on the tester i have yet to see an angle eye pass an mot properly, not one of them i have seen has given a beam patten fit some lucus or wipac headlamps and have some show me where i am going rather than they look pritty
dave
dave
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users