Can i use a 190 mm clutch in my 1991 998 instead of the 180mm wide one?
Verto Clutch
Started by
andyt
, Feb 04 2016 07:55 PM
6 replies to this topic
#1
andyt
-
- Members
-
- 375 posts
Speeding Along Now
- Location: Melksham
- Local Club: cooper register
Posted 04 February 2016 - 07:55 PM
#2
mini13
-
- Members
-
- 3,811 posts
Up Into Fourth
Posted 04 February 2016 - 08:00 PM
yes, as far as I have seen all verto's can take a 190mm plate
#3
cal844
-
- Members
-
- 9,713 posts
Crazy About Mini's
- Location: Ballingry, Fife
- Local Club: TFMOC
Posted 04 February 2016 - 08:06 PM
190 is for the turbo engines, measure across the wear on your clutch to see what size you need
#4
andyt
-
- Members
-
- 375 posts
Speeding Along Now
- Location: Melksham
- Local Club: cooper register
Posted 04 February 2016 - 08:18 PM
The thought I read in a Keith Calver article that it was a useful upgrade for the 180mm plate.
#5
Cooperman
-
- TMF+ Member
-
- 23,513 posts
Uncle Cooperman, Voted Mr TMF 2011
- Location: Cambs.
- Local Club: MCR, HAMOC, Chelmsford M.C.
Posted 04 February 2016 - 11:23 PM
Not really needed in a 998.
#6
jaydee
-
- Members
-
- 8,565 posts
Crazy About Mini's
Posted 05 February 2016 - 12:27 PM
A skim is highly reccomended if the flywheel has been used with the smaller clutch before
#7
Cooperman
-
- TMF+ Member
-
- 23,513 posts
Uncle Cooperman, Voted Mr TMF 2011
- Location: Cambs.
- Local Club: MCR, HAMOC, Chelmsford M.C.
Posted 05 February 2016 - 01:23 PM
The thought I read in a Keith Calver article that it was a useful upgrade for the 180mm plate.
It is for a modified or competition 1275. Otherwise not really necessary.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
