Hi all my pickup has a spinning front end subprime engine brakes Tec
When I am sitting at the traffic lights the brake pedal very very slowly goes down, I have new new pipework throughout and I am not looking any fluid, someone has suggested that it could be a fault with the servo or the servo pipework, has anyone had similar issues? Thanks steve
Spi Servo Issue?
Started by
southlincspickup
, Mar 15 2016 10:52 PM
4 replies to this topic
#1
southlincspickup
-
- Noobies
-
- 84 posts
Stage One Kit Fitted
- Location: lincs
- Local Club: Bomber county minis
Posted 15 March 2016 - 10:52 PM
#2
MacGyver
-
- TMF+ Member
-
- 1,028 posts
One Carb Or Two?
- Location: Fribourg
Posted 15 March 2016 - 11:11 PM
Sounds like your master cylinder is not holding the pressure, altho I must admit I have no idea what a 'spinning front end subprime engine brakes Tec' is...
#3
MRA
-
- Banned
-
- 7,607 posts
Previously known as 'mra-minis.co.uk'.
- Location: Due to move again....
Posted 16 March 2016 - 03:12 AM
look for leaks especially the rear wheel cylinders
#4
cal844
-
- Members
-
- 9,713 posts
Crazy About Mini's
- Location: Ballingry, Fife
- Local Club: TFMOC
Posted 16 March 2016 - 10:20 AM
Check Rear wheel cylinders, master cylinder, callipers(or front drums!) also the valve on the bulkhead and also check the flex pipes for leaks too!
#5
southlincspickup
-
- Noobies
-
- 84 posts
Stage One Kit Fitted
- Location: lincs
- Local Club: Bomber county minis
Posted 11 April 2016 - 09:18 PM
no leaks at all but still slowly dropping
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
