2 replies to this topic

[minituga]

Can anyone give me some info on this head?

what are all this markings on it?

Attached Files

•  10419448_1163146373718308_5575520920167172358_n.jpg   65.4K   18 downloads
•  1503333_1163148827051396_7411406664378280209_n.jpg   74.15K   19 downloads
•  1505205_1163148650384747_1534209553089279200_n.jpg   71.83K   8 downloads
•  1930581_1163146480384964_637159399979163391_n.jpg   44.93K   13 downloads
•  1688152_1163148967051382_2613501189267916492_n.jpg   70.94K   8 downloads
•  10325781_1163148853718060_1247681581151867762_n.jpg   79.09K   7 downloads
•  10628302_1163148743718071_6566777977390117049_n.jpg   55.81K   24 downloads
•  12112510_1163146443718301_7019781655485852161_n.jpg   45.26K   17 downloads

[nicklouse]

http://www.theminifo...-a-12g938-head/

[carbon]

Possibly a Longman modified head with 16.4cc chambers, 100 thou skimmed off. Check the head depth, it should be about 2.65 inch.

 

Well oversized inlet valves, with not a lot of meat left between inlet and exhaust. Check this carefully as it will be difficult to recondition properly if the valve seats are recessed - and not easy fitting valve inserts to throats this large.