7 replies to this topic

[No-dice]

Hi, the mini project we are doing was bought in pieces/boxes, it has no wiring loom or dash


I've got a standalone ecu and wide and that I've got wired up, just the actual car stuff is missing
We would like to make a custom dash anyway, I'm not to bad with wiring and ok-ish with diagrams.

Most of the wiring I can probably figure out., what I'm most wondering about is the indicators.....how do I get them to flash on and off lol !!!!

Any guides/tips about

[Scoobyfanatic]

In order to get them to flash correctly you would need a flasher relay, eBay will probably have them cheap enough and if your lucky come with a wiring diagram too.

[No-dice]

Cheers, simple enough then,

Is the rest of the loom simple enough to assemble, any tricky bits to be aware of

[Scoobyfanatic]

That will have to be answered by one of the other experts on here as I'm afraid that's as far as I'm able to go with advice lol but good luck with it all

[ChopperHarris]

age, model ?

[No-dice]

E reg......it has no dash/clocks, all lights are there though

[vx220]

Car Builder Solutions have a complete fuse/relay box/loom builder available, everything labelled for all necessary lights, switches etc?

[No-dice]

Oooo, il take a look , cheers