I bought a servo kit but the description says the following; Please also note that the adaptor required for the inlet manifold is not included as part of the kit. I'm not sure what this means I have to get. Any ideas?
Fitting A Servo
Started by
Nikko
, May 03 2016 06:07 AM
6 replies to this topic
#2
Baldspeed Racing
-
- Members
-
- 1,203 posts
One Carb Or Two?
- Location: Southam
Posted 03 May 2016 - 06:37 AM
Could be an adaptor pipe as the servos need pressure from the carb to allow for the correct set up, what kit is it and what carb are you running?
#3
The Principal
-
- Members
-
- 765 posts
One Carb Or Two?
- Location: Sussex
Posted 03 May 2016 - 06:47 AM
you havent said what model or year but guess you may be referring to the manifold take off - http://www.minispare...|Back to search
#4
Nikko
-
- Noobies
-
- 125 posts
Mini Mad
- Location: London
Posted 03 May 2016 - 06:59 AM
It's a 87 Park Lane. No clue what the carb is (no mechanical knowledge) and this is the kit I bought http://pages.ebay.co...0866374&alt=web
#5
gazza82
-
- TMF+ Member
-
- 3,086 posts
Up Into Fourth
- Location: Bucks
- Local Club: TMF+
Posted 06 May 2016 - 09:07 AM
If you look at this inlet manifold you will noticed a large threaded hole in the top left ... that's where the hose adapter screws in and the thick walled hose with the kit attaches too.
http://minispares.co...nlet/Inlet.aspx
There are different inlet manifolds around .. a picture of yours would help ...
Edited by gazza82, 06 May 2016 - 09:10 AM.
#6
maccers
-
- Members
-
- 1,880 posts
Camshaft & Stage Two Head
- Location: Epsom
- Local Club: LSMOC
Posted 06 May 2016 - 09:15 AM
Are you fitting this yourself?
#7
gazza82
-
- TMF+ Member
-
- 3,086 posts
Up Into Fourth
- Location: Bucks
- Local Club: TMF+
Posted 06 May 2016 - 10:45 PM
Didn't like to ask .... 
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
