12 replies to this topic

[rally1380]

Owing to a little mishap, i'm after a good condition (must be straight....or at least straighter than the one below!!!) clubby grill and bumper assembly to aid in the rebuild of my rally car.

 

 

* those of a nervous mini damage disposition please do not look at the disturbing image below!!!!!!!

 

 

 

 

 

 

 

 

I'm located in Macclesfield (Just south of Manchester) and will travel, but if you're prepared to courier or meet half way then even better.

 

Thanks in advance guys - I've been putting off rebuilding the car but now i'm over the crash it's time to get back out competing.

Edited by rally1380, 01 June 2016 - 10:06 AM.

[Archived2]

Yup, pm me mate.

Sorry to see the mini looking that way!

[GT Jimmy]

Nice one, Glad you're rebuilding it

[rally1380]

Nice one, Glad you're rebuilding it

 

Was never in doubt mate.....was always going to be rebuilt (famous last words!!!)

[leaky]

I got a couple of grills, I'll dig them out over the weekend and check what nic they are in.

[GT Jimmy]

Nice one, Glad you're rebuilding it

 
Was never in doubt mate.....was always going to be rebuilt (famous last words!!!)

Good luck wirh it mate. I thought my GT was bent at the front till I saw yours

[rally1380]

Yeh, luckily it's a strong little car....hence why I walked away and not stretchered out!

[rally1380]

BUMP.............No one want my money?  Please PM me if do.

[One step at a time]

There's a few on eBay at the moment.

[dodgy weedgie]

I have. Best to give me a call or txt keith 07849 081713

[rally1380]

There's a few on eBay at the moment.

 

Yeh, but a lot are daft money for what they are......in my opinion.  I realise I use the car for competition and so shouldn't care if they are slightly bent and kinked, but i'm not paying through the nose for something.  Ebay prices seem daft compared to how much some folk on here ask for items.

 

But rest assured, Ebay is watched.

[dodgy weedgie]

I left my number. I have the bits required, postage not a problem so no harm in asking for a price

[rally1380]

I left my number. I have the bits required, postage not a problem so no harm in asking for a price

 

To be honest someone near me has already PM'd me regarding the parts.  I'm waiting for them to reply first as I can go an inspect those parts and give a yes or no there and then.    By all means post up some photo's of what you have got....you never know, someone might bite your arm off.