10 replies to this topic

[alex-95]

My Clutch push rod it pretty rusty and worn out, So would one made stainless steel be ok? 

Like these http://i.ebayimg.com...lXJ4eS/$_35.JPG

[AndyR]

Why not try a titanium one!

 

http://titanclassics...tanium-pushrod/

[ukcooper]

What AndyR said, There great :)

[Turbo Nick]

ran a stainless one on mine for years wth no issues

[alex-95]

Why not try a titanium one!

 

http://titanclassics...tanium-pushrod/

Do you think I'm made of money!

 

What AndyR said, There great :)

 

 

ran a stainless one on mine for years wth no issues

 

Cheers will get one made up.

 

 

which brings the next question of the hole diameter and the centre of the hole to the end of the pin?

[alex-95]

Any body got the dimensions for the Hole diameter and the distance from the small Diameter end to the centre of the hole?

[morley]

Could you not just measure the one you have? 

[alex-95]

Could you not just measure the one you have? 

I would but the hole is Like "0"  rather than "o"  . I can get the other dims, length of pin and diameters just need the Hole diameter and the distance from the small Diameter end to the centre of the hole.

[Richie83]

I am thinking of doing the same. Is it tricky to replace?

[AndyR]

Hole is 5/16 and length is 3.3"

 

Andy

[alex-95]

Hole is 5/16 and length is 3.3"

 

Andy

Perfect Cheers Mate