1 reply to this topic

[Ianm11]

Hi lads currently in the process of trying to fit a heritage drivers half floor pan including the inner sill. Now i didnt use the whole pan just cut it roughly to shape as the rear part of the pan is ok so just used the front part and the full inner sill but at the front around where the steering rack bolts upto on the heritage pan theres a half moon cut away but doesnt seem to line up with the hole for the steering rack bolt. Is this a problem or have i done something wrong🙈

Edited by Ianm11, 03 September 2016 - 03:23 PM.

[Swift_General]

The half moon cut out is for the subframe, not steering rack. If your subframe solid or rubber mounted?