9 replies to this topic

[mini-mad]

hi, hope someone can help me.. im considering welding over the pertol hole in the rear passenger wing..

has anyone done this before? i was then gonna drill a new hole onto the petrol tank?

it would be great if anyone has got any pics of this or has done this!!!

Thanks

[Jammy]

Why do you want to drill a new hole for the petrol tank? Are we talking about drilling into the tank itself, or just altering the bodywork?

[mini-mad]

Why do you want to drill a new hole for the petrol tank? Are we talking about drilling into the tank itself, or just altering the bodywork?

drilling into the tank...

so when i need to put petrol i can do it from the boot

[Bounce]

Why dont you just remount the tank so you can still use the original filler hole??

[minivanman]

get an ally fuel cell made up. drilling/ cutting/ welding a tank is not very high on my to do list!

[Jammy]

I'm guessing you want to smooth over the petrol filler hole to achieve the 'smooth' look?

If so do as Minivanman says, weld up the hole and get an alloy fuel cell in the boot.

[ANDY J]

hi, hope someone can help me.. im considering welding over the pertol hole in the rear passenger wing..

has anyone done this before? i was then gonna drill a new hole onto the petrol tank?

it would be great if anyone has got any pics of this or has done this!!!

Thanks

Hi mate ive PM you

[Alburglar]

or fit a flush filler cap over the original filler hole

[Retro_10s]

mmm smooth.

Alloy tank in the boot is a good, tried and tested method.

[ANDY J]

emailed you & pm