Edited by Lewbo, 30 September 2016 - 08:37 PM.

1 reply to this topic
#1
Posted 30 September 2016 - 08:14 PM
Hi, so over the winter I've planned to have my baulk ring replaced, which may mean the syncro hub needs replacing, however this evening I started up just to turn the engine over as it hasn't been started in a few days, and found some oil spray on the floor, it looked to be from the remote control housing, can anyone tell me how much it might cost in labour to replace both of these problems, I know I'm expecting about 300 in parts alone. Thanks
#2
Posted 30 September 2016 - 08:15 PM
Hi, just need some advice on a loose pipe I've found and need some troubleshooting help, attached is a photo of the engine bay. Cheers
You forgot something.
Also tagged with one or more of these keywords: engine
Mini Technical Sections →
Problems, Questions and Technical →
What Size Are These Main And Big End Bearings?Started by scottyboy805 , 19 Jul 2025 ![]() |
|
![]()
|
||
engine
Mini Technical Sections →
Problems, Questions and Technical →
Spi Bad Idle And 'tapping' Engine SoundStarted by Simmi Westo , 15 Jul 2025 ![]() |
|
![]()
|
||
![]() Help! Water In Oil Question....Started by TerryLee , 06 Jul 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Rebuilt Engine Wont Crank With CompressionStarted by Kernreuben , 04 Jul 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
1966 Mini S - Clutch IssuesStarted by MBradbury73 , 01 Jul 2025 ![]() |
|
![]()
|
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users