2 replies to this topic

[Jonny90]

In need of a little help!

My door hinge panel is rotten and I'm looks for advice on parts required and pointers on how to carry out the repair.

i have ordered the 2 parts attached and I'm wondering if I need to use both or just the one because it looks like the hinge area is made of 2 plates?

If I do need both obviosly I will cut out the wheel arch section first but will this give me access to the other part inside or do I need to remove part of the door frame to gain access.

Also, I have no idea how it goes together so any installation guide would be greatly appreciated.

Attached Files

•  image.jpeg   11.04K   4 downloads
•  image.jpeg   14.4K   5 downloads
•  image.jpeg   30.33K   15 downloads
•  image.jpeg   20.87K   12 downloads

[Ben_O]

You will need an A post too. It's actually 3 panels

 

non-genuine - http://minispares.co...|Back to search

Genuine - http://minispares.co...|Back to search

 

I can't comment on the non genuine ones as i haven't used them but may be ok if funds won't stretch

 

Here is a link to one that i did which may help

 

http://www.theminifo...rebuild/page-32

 

Ben

[Compdoc]

Don't bother with the non genuine ones, they really are rubbish.