139 replies to this topic

[Mito]

Thought I'd better start a project thread for my red one. It's a 998 1991 rover mini. It started life as a studio 2 and at some point, fairly recently, was very roughly resprayed in red. I'll be doing it as a rolling restoration up until i get to replacing the floor and I'll hopefully have the blue one on the road by then. Just reminded myself of the old milky way advert!:-)
 WP_20170326_12_53_34_Pro.jpg   66.94K   23 downloads  WP_20170326_12_54_02_Pro.jpg   60.46K   18 downloads  WP_20170326_12_54_23_Pro.jpg   72.97K   14 downloads  WP_20170326_12_54_55_Pro.jpg   58.29K   17 downloads

Edited by Mito, 26 March 2017 - 01:27 PM.

[Cameron2310]

x

Edited by Cameron2310, 11 July 2021 - 10:58 PM.

[Mito]

It will take a bit longer than I'd hoped but will just repair a bit at a time. So long as it's back on the road for the end of may, I'll be happy
 WP_20170326_14_01_14_Pro.jpg   89.13K   15 downloads  WP_20170326_14_01_22_Pro.jpg   61.61K   7 downloads  WP_20170326_14_01_19_Pro.jpg   71.69K   6 downloads

Edited by Mito, 26 March 2017 - 01:13 PM.

[Mito]

The rebuilding begins...
 WP_20170326_19_48_12_Pro.jpg   36.03K   13 downloads

Doesn't look like the door strengthener is quite right???
 WP_20170326_19_47_43_Pro.jpg   37.68K   11 downloads

Edited by Mito, 26 March 2017 - 07:15 PM.

[Mito]

It looks like I forgot to update this thread after finishing off rebuilding the front flitch and a panels.So, heres a couple of after pics taken just before I started stripping down the car.

 

Drivers side all rebuilt.

 WP_20180211_11_58_58_Pro.jpg   30.03K   1 downloads

 

Passenger side rebuilt.

 WP_20180211_11_58_23_Pro.jpg   29.04K   3 downloads

 

Now the strip down begins.

 

Face off! There isn't much, if any, metal left underneath the headlights.

 WP_20180211_12_55_26_Pro.jpg   51.13K   5 downloads

 

Took the rear headlamp out and theres something wrong with the rear arch, I just can't quite put my finger on it ;)

 WP_20180211_13_42_44_Pro.jpg   56.84K   2 downloads

 WP_20180211_13_42_59_Pro.jpg   70.39K   2 downloads

 

I'm not sure about the bumper ?rail? but doesn't appear to look too bad around the bottom of the boot.

 

 WP_20180211_13_57_04_Pro.jpg   35.7K   2 downloads

 WP_20180211_13_57_10_Pro.jpg   33.25K   1 downloads

 WP_20180211_13_57_18_Pro.jpg   39.79K   1 downloads

 

I'm sure there will be some more horrors to come. To be continued...

[Mito]

Tonight I've emptied the boot. It's now ready for the subframe to be dropped.

Holes are bigger than expected.
 WP_20180222_19_31_12_Pro.jpg   63.15K   1 downloads
 WP_20180222_19_31_18_Pro.jpg   55.28K   0 downloads
 WP_20180222_19_31_23_Pro.jpg   39.23K   0 downloads

I can see daylight through the rear arch.
 WP_20180222_19_31_31_Pro.jpg   57.96K   2 downloads

And there don't appear to be any holes in the battery box which shouldn't be there.
 WP_20180222_19_31_39_Pro.jpg   55.87K   2 downloads

[Mito]

Carried on with stripping the car down today by taking the engine out.

The engine mount bolts were a right pita to get too!

 WP_20180224_19_05_36_Pro.jpg   51.75K   3 downloads

[Mito]

Dropped the front sub frame and started cutting away the front panels to assess how many panels i'll be needing.

Both inner wings need work and possibly full replacement.
 WP_20180304_16_18_06_Pro.jpg   60.8K   0 downloads  WP_20180304_16_18_17_Pro.jpg   48.49K   1 downloads  WP_20180304_16_18_27_Pro.jpg   51.54K   1 downloads  WP_20180304_16_25_06_Pro.jpg   56.07K   1 downloads  WP_20180304_16_18_32_Pro.jpg   52.85K   2 downloads  WP_20180304_16_18_42_Pro.jpg   55.84K   2 downloads

And surprisingly someone's filled over some rust in the boot.
 WP_20180304_16_24_24_Pro.jpg   45.99K   1 downloads  WP_20180304_16_24_27_Pro.jpg   50.56K   0 downloads

[Mito]

Took out the Windscreen, dashboard and top rail.

 WP_20180308_19_43_43_Pro.jpg   45.78K   3 downloads

[Mito]

Removed all of the glass and doors today, plus another few bits and bobs.

 

Cut the front panel off as well.

 

 WP_20180310_14_54_09_Pro.jpg   32.98K   0 downloads

 

 

 WP_20180310_14_53_57_Pro.jpg   44.87K   0 downloads

 

And the bulk head cross member has quite a bit of rust on it. Heres hoping that it is only surface rust!

 WP_20180310_17_38_13_Pro.jpg   46.68K   0 downloads

 WP_20180310_17_38_26_Pro.jpg   49.7K   0 downloads

 WP_20180310_17_38_32_Pro.jpg   49.4K   0 downloads

Edited by Mito, 10 March 2018 - 09:19 PM.

[johnR]

Quite a bit to do there - good luck with it

[Mito]

Parts arrived!

Inner wings and pieces to go under the scuttle corners.
 WP_20180317_12_25_01_Pro.jpg   42.09K   1 downloads
Rear arch, boot repair panel, a panels and scuttle corners.

 WP_20180317_12_24_43_Pro.jpg   35.64K   2 downloads

Rear valance, closing plates, repair panels for boot and ?rear arch strengtheners. Not forgetting the petrol tank fixing bracket.

 WP_20180317_12_25_15_Pro.jpg   36.28K   1 downloads

There's a full floor assembly in the box

 WP_20180317_12_25_55_Pro.jpg   49.24K   0 downloads

Everything I need for now!

[Mito]

I've not even waved the angle grinder near it yet!

 WP_20180317_15_18_30_Pro.jpg   52.12K   1 downloads

 WP_20180317_15_18_17_Pro.jpg   60.65K   1 downloads  WP_20180317_15_18_26_Pro.jpg   50.24K   0 downloads

Edited by Mito, 17 March 2018 - 03:23 PM.

[Mito]

​A "good solid repair" behind a good 2mm of filler with holes either side????

 

 WP_20180322_15_30_48_Pro.jpg   36.72K   8 downloads

[MacGyver]

​A "good solid repair" behind a good 2mm of filler with holes either side????
 
WP_20180322_15_30_48_Pro.jpg

Good to see it properly tacked in... 😶