8 replies to this topic

[munoz]

Can anyone help me as to where this locking washer belongs?? 

 

 18290129_10158575876855207_719428637_o.jpg   23.9K   70 downloads

[Rapidmini59]

I have one of those too.

It may of come from one of the bolts holding the gearbox to the block but alas i could not find which bolt it went on so i have not put it back on yet.

I put a long bolt through mine and a nut on the end when i took the box off about four years ago.

Can any one help us please.

Edited by Rapidmini59, 02 May 2017 - 05:39 PM.

[tiger99]

I think it is off the block to gearbox bolt which passes through a hollow dowel. Only one of those. Possibly front, near the transfer case. If not, it is same end, at the back.

It is apparently obsolete but could easily be made at home if needed.

[nicklouse]

http://www.minispare...e.aspx?2~14~123

Through the hollow dowl.

[Spider]

I think it is off the block to gearbox bolt which passes through a hollow dowel. Only one of those.

 

Yeap. At the back, the last bolt next to the Transfer Housing. That Washer goes on the flange of the Block and you'll need a big washer of some thickness on the gearbox side too, Don't fit a normal 1/4" washer on the bottom side, or it'll get sucked in to the dowel hole.

[Rapidmini59]

Cheers moke spider that means i will have to fit mine now.
Darn it.
Cheers

[Spider]

Cheers moke spider that means i will have to fit mine now.
Darn it.
Cheers

 

If it's not fitted, I wouldn't loose any sleep over it

[munoz]

 

I think it is off the block to gearbox bolt which passes through a hollow dowel. Only one of those.

 

Yeap. At the back, the last bolt next to the Transfer Housing. That Washer goes on the flange of the Block and you'll need a big washer of some thickness on the gearbox side too, Don't fit a normal 1/4" washer on the bottom side, or it'll get sucked in to the dowel hole.

 

I have everthing sorted and ready for reassembly, then this guy turns up!! 

 

Thanks! 

[Spider]

 

 

I think it is off the block to gearbox bolt which passes through a hollow dowel. Only one of those.

 

Yeap. At the back, the last bolt next to the Transfer Housing. That Washer goes on the flange of the Block and you'll need a big washer of some thickness on the gearbox side too, Don't fit a normal 1/4" washer on the bottom side, or it'll get sucked in to the dowel hole.

 

I have everthing sorted and ready for reassembly, then this guy turns up!! 

 

Thanks! 

 

 

Yeah, he's a real pest