10 replies to this topic

[PhoenixSimon]

Hello
ive got some seats for my mini but they are non standard, does anyone have any subframes to fit a mini that they could measure to see what bolt spacing they have for attaching to the underside of the seat.
And if anyone has any sub frames they want to sell I would be very interested!!
cheers Simon

[Retro_10s]

I have some new subbies coming in the post tomorrow so i can get measurements form them. But I'll need to know the bolt spacing of your new seats mate so i can compare them.

[PhoenixSimon]

I will measure mine in a while and post them up.
cheers simon

[Retro_10s]

ok mate.

[PhoenixSimon]

Ok measured mine and from side to side they measure 12.5 inches from bolt centre to bolt centre and from front to back they are 14.75 inches again from bolt centre to bolt centre.
cheers simon

[PhoenixSimon]

so nobody on here has any bucket seast that they could measure the mountings holes for me!!!!!
didnt realise it was such a difficult thing to do.
Simon

[PhoenixSimon]

cheers for all the replys!!

Its a good job I didnt ask for anything difficult.

Simon

[miniboo]

what seats have you got?

It might be best to fab up some custom subbies to fit the seats you have

[PhoenixSimon]

ive got some mazda rx7 seats, I just wanted to know what size mini frmaes designed for cobra etc seats use and I might get away with welding them on by using some tabs or hopefully just bolt straight on.
Simon

[miniboo]

ahh right see

good idea

why not just get the cobra subbies and then make an adpater bracket to joing the two.

[PhoenixSimon]

thats what i was looking at doing but didnt want to fork out for some sub frames if they were going to be miles away. I thought that someone with some buckets woudl take a minute to help me out a measure the spacing but seems I was wrong.
thanks for your input though miniboo its really appreciated
Simon

Edited by 200sxsimon, 28 September 2006 - 07:11 PM.